Description

Motul 800 2T Factory Line Off Road

MOTUL 800 2T Factory Line Off Road is a 2-stroke high-performance engine oil based on E technology. Specially adapted to the extreme demands of MX sports, both for water-cooled and air-cooled engines.
For road motorcycle racing MOTUL 800 2T Factory Line Road Racing is recommended. Usable for regular gasoline and unleaded gasoline up to 124 octane.

SPECIFICATIONS/STANDARDS:

– STANDARDS: Exceeds API TC

E TECHNOLOGY:

For several decades, MOTUL has been developing high-performance engine oils based on synthetic esters.
The special selection of synthetic esters and combination with an innovative additive package form an exceptional synergy.
E is the latest technological development stage and allows maximum power output of the engine without compromising reliability and wear.

ADVANTAGES:

– Max. Oil film stability, optimum adhesion, high temperature resistance for optimum wear protection.
– Low traction coefficient of E technology reduces friction losses.
– Very high pressure absorption capacity guarantees maximum lubrication reliability even in extreme temperature ranges.
– Perfect fast response of the engine even with rapid successive load changes.
– Excellent cleaning ability keeps pistons and the entire engine parts clean. This prevents deposits and coking in the combustion chamber and spark plugs.
– Prevents sticking of the piston rings and performance-reducing deposits in the exhaust and exhaust
– De-emulsifying additive package prevents sticking of the throttle valve and allows perfect lubrication even when operating in the rain or high humidity.
– Through red coloring good detectability in the fuel / oil mixture.
– Available in the practical resealable 1-liter can with filler neck, dosing scale and visual strip, making it easier to refill the oil or premix.

COMMENDATIONS AND NOTES:

– Only for self-mixing, not in Autolube or. Separate lubrication systems use.
– Fine-tune mixing ratio according to their own experience in conjunction with the manufacturer’s specifications.
– Before use, be sure to observe service documents and recommendations of the manufacturer / tuner! Mixing with other synthetic or mineral lubricants is possible, but not recommended for optimum performance.

Properties:

– Color (visual) red
– Density at 20°C ASTM D1298 0.911
– Viscosity at 100°C ASTM D445 15.5 mm²/s
– Viscosity at 40°C ASTM D445 120.2 mm²/s
– Viscosity index ASTM D2270 135
– Pour point ASTM D97 -48°C
– Flash point ASTM D92 252°C